AquaSurge Pumps by Aquascape Energy-Efficient! FREE SHIPPING!

The Aquasurge Pump is the perfect replacement pump if you currently have a Aquascape Pro 3000 or Aquascape Pro 4500.

Ideal for medium to large ponds up to 13,000 gallons. AquaSurge Pumps are ideal for use as a high flow waterfall pump. Their unique design allows them to be used either vertically or horizontally.The asynchronous motor design ensures that the impeller spins in only one direction; maximizingperformance and reliability while minimizing electrical consumption

NOW FREE SHIPPING ON ALL AQUASURGE PUMPS!!!!

The Top Three Reasons for replacing your Aquascape Pro 3000 or 4500 with an AquaSurge are:

1. Price is about $80 - $160 cheaper for comparable Flow Rates'

2. AquaSurge 3000 gph pump takes only 180 Watts vs. 280 watts for the Aquascape Pro 3000. The AquaSurge 5000 gph pump takes 250 Watts vs 625 Watts for the Aquascape Pro 4500.

3. The AquaSurge is the FIRST pump in the industry to have a THREE year warranty. The Aquascape Pro line has a 2 year warranty.

High flow rates and low electrical operating costs make the AquaSurge pump Aquascape's #1 seller.

Robust, reliable, efficient, and quiet.

Low electrical operating cost.

Fish safe - uses no oil.

20' cord.

Includes one 1.5" threaded coupler that converts the 1.5" Male Thread to a 1.5" Female Thread and one 90 elbow.

Can be used vertically or horizontally.

Recommended for use in a skimmer prefilter or MicroSnorkel Pondless Waterfall Vault.

3-year warranty.

12" Wide x 7 Tall x 5" Diameter

Also, if you are converting to the AquaSurge 2000, there will be a reducer bushing that comes with the AquaSurge 2000 that you will thread into the 1" discharge.

AquaSurge Pump Performance Chart

Model

Discharge

Watts

Monthly

Operating

Costs*

Max

Head

Height

0'

5'

10'

15'

20'

2000

1.0"

250

$18.24

22'

1900

1500

1300

900

300

3000

1.5"

180

$13.13

15'

3328

2853

1902

4000

1.5"

220

$14.45

16.5'

3960

3300

2700

1426

5000

1.5"

250

$18.24

19.5'

4752

4280

3328

2377

7000

2.0"

700

$50.57

22'

6600

5100

4000

2800

1000

*Watts based on 10 cents/kilowatt hour

AquaSurge Pump

● Type of Pump: Wet rotor/Asynchronous

● Application: Medium size water features. High flow rates with low to medium heads.

● Electrical Efficiency: Very efficient

● Maintenance: Moderate solids handling capabilities. Filter screen may require cleaning from time to time. Best used with a prefilter such as a skimmer.

Note: You will need to order the AquaSurge Conversion Kit #29705 when converting Your Aquascape Pro (SFA) Pump 1500, 3000 or 4500 to AquaSurge

Use the AquaSurge Conversion Kit (Part#29705) to connect the 1.5" Female Threaded Outlet to either 2" or 1 1/2" Check Valve Assemblies.

The contains the parts necessary to convert any AquaScape Pro pump to the AquaSurge Pump using your existing Check Valve Assembly and Aquascape Skimmer.

The kit includes two parts - one you will use and the other you will not need:

1 1/2" Male Thread x 2" Slip adapter for Classic Series Skimmers and Check Valves. All you do is cut off the 2" Black Flexible PVC pipe between the check Valve and the pump. Screw the 1.5" male Threaded Part into the pump and glue the existing 2" Flexible pvc into the other end of the adapter.

- OR -

2" Aquascape Check Valve Adapter for Signature Series Skimmers and Check Valves. Has a 1.5" Male Threaded Part to screw into AquaSurge and 2" Aquascape custom-made Flange to fit into Aquascape 2" check valves. Just throw away old part.

The AquaSurge 2000 has a 1" Male Thread Discharge and comes with a 1" x 1.5" Male Adapter. All of the other AquaSurge pumps have a 1.5" Male Thread Discharge.

Special Note for Aquascape Pro 1500 (SFA1500)and Aquascape Pro 4500(SFA4500) Owners!

The Aquascape Pro 1500 was discontinued at the first of the year. The AquaSurge 2000 and the 3000 are the official replacement pumps.Comparing the Pump Performance charts on this page will tell you which will be the best pump for you. The Aquascape Pro 1500 was $349 and the AquaSurge 2000 is $319.98 and the AquaSurge 3000 is $343.98.

If you have any questions whethjer the pump is strong enough, please compare the AquaSurge and Aquascape Pro Pump Performance Charts. The "Head Height" is theVERTICAL height from the pump to the TOP of the BioFalls. To this you add 1 foot of Head Height for every 10' of horizontal distance that the pipe travels from the pump to the BioFalls. Find andinterpolate the Head Height on each charge to determine the amount of water flow provided by each pump.

The Aquascape Pro 1500 took 205 watts vs the AquaSurge2000 which takes 250 watts (it is capable of pumping water higher (22') than the Aquascape Pro 1500) and the AquaSurge 3000 which only uses 180 watts.You may want to take this opportunity to step up the water flow of yourpond with the AquaSurge 3000 which uses less power than your old Aquascape Pro 1500 and at 10' of Head Height will generate 50% more water flow. If you are happy with your current flow, then please select the pump that most closely approximates that flow.

The AquaSurge 5000 only takes 250 watts compared to 625 watts for the Aquascape Pro 450 and is about $160 less to buy. At 5' of Head Height, there is very little difference between the water flow of the Aquascape Pro 4500 and the AquaSurge 5000. As the Head Height increases, there is a larger water flow difference. The decision for you to make is whether or not the significasnt energy and purchase price savings will be offset by a reduction in water flow.

Just a heads up - if you are switching from the Aquascape Pro (SFA) 1500 or the Aquascape Pro 4500 (SFA4500)pump to either Aquasurge, you will need the Conversion Kit 29705. The Aquascape Pro pumps have a 2'" female threaded outlet and the Aquasurge has a 1.5" male threaded outlet with a 1.5" female threaded adapter. The "Kit" only has 2 parts. One part is for the Classic style skimmer and check valve assembly which has a black 2" Flexible pvc hose between the pump and the check valve. If you have this simply cut-off the hose and glue into the 2" slip fitting with pvc glue and screw the 1.5" male thread into the 1.5" female threaded part on the Aquasurge pump.

If you have the Signature Series skimmer and check valve, you merely unscrew the hard plastic piece between the pump and Check valve and screw in the 1.5" male into the Aquasurge and the 2" flanged side into the bottom of the check valve assembly.

AquaScape Pro Pump Performance Chart

Model

Watts

Cost

Per

Month*

Max

Head

Height

5'

10'

15'

20'

25'

30'

35'

40'

1500

205

$14.96

18'

1650

1150

400

3000

280

$20.43

20'

2900

2000

1250

4500

625

$45.60

33'

4500

4000

3300

2700

2000

1100

7500

1150

$83.90

42'

6700

6200

5600

4800

4200

3400

2500

1200

10,000

1240

$90.47

29'

10600

8200

6800

5000

2600

*Watts based on 10 cents/kilowatt hour

Please feel free to call us at 805-241-0141 if you have any questions about the connections.

Aquasurge 7000 Adapter(Signature Series)- 30124 - 2' Male thread which threads into pump and special custom-made by Aquascape flange on the other side that screws into union fitting on the bottom of the Signature Series Check Valve Assembly

Aquasurge 7000 Adapter(Classic Series)- No additional converter necessary - Aquasurge 7000 comes with a 2' female thread x 2" female thread which will turn the Aquasurge into a 2" female thread.

AquaSurge Volute replacement Kit contains:

WATER CHAMBER COVER REPLACEMENT KIT INCLUDES

WATER CHAMBER COVER (OR VOLUTE)

90 DEGREE ELBOW

1.5" X 1" REDUCER BUSHING

THREADED COUPLER

VOLUTE SCREWS & BOLTS

PUMP CORD HARDWARE

Alan Z Email - 5/13/10:

I just wanted you to know that the AquaSurge 5000 pump I purchase from you last February has been working wonderfully. As you remember the reason I bought the pump was for energy efficiency. The pump has surpassed my wildest expectations. I can't quite figure this one out but since changing over pumps my kilowatt usage has been lower(!) than it was one and two years ago. I haven't even crossed over into Tier 2. So it's been a great success.