|
Product Catalog > Pond Pumps > Aeration Pumps > Clover Big Shot Fountain by Scott Aerator (NEW)
SCA30A
|
High quality value-based, American-manufactured pond fountains and water aerators. Manufactured using a stainless steel, oil-free submersible motor. All 1/2-HP models include 70’of 1 2g power cord. All 1.5-HP models include 100’ of 1 2g power cord. Motor carries 5-year warranty.
The brass center nozzle sprays at heights of up to 20’on the 1/2-HP model (40’on the 1.5HP model) and it’s surrounded by separate side nozzles which create a spectacular angled spray pattern, projecting water over 15’ at a 45 degree angle.
The “Clover” creates an impressive cascade of water that sounds as beautiful as it appears!
The brass center nozzle of the “Clover” sprays at heights of up to 20 feet, and it's surrounded by separate side nozzles which create a spectacular angled spray pattern, projecting water over 15 feet at a 45 degree angle.
When purchased with the optional 1 ˝ hp oil free motor, the “Clover’s” main stream will reach heights over 40 feet and the side nozzles over 20 feet.
Form and function can co-exist, as the “Clover” not only beautifies your pond but it also provides a healthy aquatic environment through oxygen transfer and water circulation.
Like all of the products Scott Aerator manufactures, the “Clover” utilizes a stainless steel, oil-free submersible motor, making it the most environmentally friendly style of fountain on the market.
The “Clover” is proudly manufactured in the USA and carries an unconditional 5-year motor warranty. This unit comes with 70 feet of submersible 12 gauge cable, greater lengths available. Available with lights too! GFCI required, please disconnect power source when swimmers present.
SPECS
115 Volt ˝ HP Oil Free Motor, 230 Volt Available Center
Stream is 20 Feet High
Side Jets Angled Spray Pattern is 15 Feet
Electric Cable Provided is 70 Feet in length, 12 gauge submersible, with plug
Electric Cable Can Be Ordered In Greater Lengths, Up To 150 Feet Long, Longer When Using The 230 Volt Motor
Light Kits Can Be Added Later
Salt Water Approved
Two 20lb. Weights or Concrete Block Required For Anchoring (Not Included)
Two Nylon Ropes Required For Anchoring (Not Included)
Designed for 24 Hour per Day Operation
No Maintenance Required
36” Minimum Pond Depth Required
Motor Specs: 60 HZ, Single Phase, 10 Amps, 680 Watts, 230 Volt Available
5 Year Motor Warranty
24,000 gph - 1/2 HP
36,000 gph - 1.5 HP
Select:
SCA30A - 1/2-HP/115V
SCA30B - 1.5-HP/230V
|
|
|
