|
Introducing a smarter way to build Pondless Waterfalls and wetland systems
Aquascape's AquaBlox Water Matrix is designed to replace up to 90% of the gravel traditionally used in the reservoir of Pondless Waterfalls applications.
The AquaBlox Water Matrix can also be used to replace the lower layer of 4-6 inch boulders in the bottom of Snorkel Vault and Centipede Module Wetland filter applications.
* Over 3 times more water storage capacity than gravel - The AquaBlox Water Matrix can hold approximately 7.4 gallons of water per cubic foot. Gravel can hold approximately 2.2 gallons of water per cubic foot.
* Extra water storage capacity results in less routine maintenance topping reservoir to compensate for evaporation.
* Easier to clean and less prone to clogging than traditional gravel basins.
* Smaller Reservoirs! The ability to hold more water per cubic foot allows for smaller reservoirs.
* Less labor excavating the basin, as well as less labor moving the manytons of gravel for basin.
* Uses less liner and geotextile underlayment.
Please Note:The Load Bearing side must be at the top:
#29491 AquaBlox Small Water Matrix Unit Weight: 11 lbs. - 9.5" Tall x 26.5" x 16" (the top Load-Bearing part is 26.5" x 16")
#29492 AquaBlox Large Water Matrix Unit Weight: 16 lbs. - 17.5" Tall x 26.5" x 16" (the top Load-Bearing part is 26.5" x 16")
Click on pdf File below for Instruction Manual:
Click on pdf File below for Instruction Manual: View PDF Info Sheet
Click on any image for a larger view

AquaBlox Small Water Matrix - 29491
|

AquaBlox Large Water Matrix - 29492
|
|
|