Introducing a smarter way to build Pondless Waterfalls and wetland systems.Aquascape's AquaBlox Water Matrix is designed to replace up to 90% of the gravel traditionally used in the reservoir of Pondless Waterfalls applications.
The AquaBlox Water Matrix can also be used to replace the lower layer of 4-6 inch boulders in the bottom of Snorkel Vault and Centipede Module Wetland filter applications.
Features
- Over 3 times more water storage capacity than gravel - The AquaBlox Water Matrix can hold approximately 7.4 gallons of water per cubic foot. Gravel can hold approximately 2.2 gallons of water per cubic foot.
- Extra water storage capacity results in less routine maintenance topping reservoir to compensate for evaporation.
- Easier to clean and less prone to clogging than traditional gravel basins.
- Smaller Reservoirs! The ability to hold more water per cubic foot allows for smaller reservoirs.
- Less labor excavating the basin, as well as less labor moving the manytons of gravel for basin.
- Uses less liner and geotextile underlayment.
- AquaBlox are assembled on-site making transporting and installation extremely efficient
Aquablox are assembled on site, making transporting and installation extremely efficient!
Please Note:The Load Bearing side must be at the top:
|
Product # |
Size |
Dimensions |
#/Dimension |
Volume |
Weight |
Load Bearing Weight |
|
29491 |
Small |
26.5”L x 16”W x 9.5”H |
4: 8” x 16”; 2: 26.5” x 8”; 2: 26.5” x 16” |
17 Gallons |
10.35 Lbs |
5,472 lbs./sq. ft. |
|
29492 |
Large |
26.5”L x 16”W x 17.5”H |
4: 26.5” x 16”; 4: 14.5” x 16” |
32 Gallons |
15.4 Lbs |
5,472 lbs./sq. ft. |
#29491 - AquaBlox Small Water Matrix: Unit Weight: 11 lbs. - 9.5" Tall x 26.5" x 16" (the top Load-Bearing part is 26.5" x 16")
#29492 - AquaBlox Large Water Matrix: Unit Weight: 16 lbs. - 17.5" Tall x 26.5" x 16" (the top Load-Bearing part is 26.5" x 16")
View the PDF for complete operating instructions.
View PDF Info Sheet
