Kasco Aerating Fountain 4400VFX & 4400HVFX 1 Hp
240v, 400' cord- 4400HVFX400
Kasco Aerating Fountain 4400VFX & 4400HVFX 1 Hp
240v, 400' cord- 4400HVFX400
May 2021: Kasco announces 3-4 week lead time on all Fountain orders due to supply chain disruptions.
Single “V” Shape Pattern 8’ H x 26’ W
Submersed motor with top intake draws water into the fountain housing and pushes the water past the deflector disc and into the air.
Individual water droplets absorb oxygen from the atmosphere and return to the body of water transferring oxygen from the air and into the water.
Moving water mixes and agitates the water, spreading oxygenated water throughout the body of water.
Single propeller and deflector disc design allows for greater water flow with a lower likelihood of clogging.
Thermoplastic bottom screen helps protect the motor from clogging.
- Available in 120 or 240V Options
- Complete Package includes Assembled Motor Unit, Power Control Panel, UV Resistant High Density Thermoplastic Float, Two 50’ Braided Nylon Mooring Lines, and SJTOW Rated 3 Wire Power Cable
- Operates in 19” (49cm) of Water
- Total Component Listed by ETL to meet UL and CSA Standards for Safety in Water
- Sacrificial Zinc Anode Installed for Corrosion Protection and use in Salt Water Applications
- Series 300 Austenitic Stainless Steel Construction of Exposed Metal; Salt Water Compatible
- 2 Year Warranty
- UPS Shippable
- Power Cable Potted Quick Disconnect on 12 and 10 Gauge Cord Options with Stainless Steel Strain Relief
- Optional Bronze Halogen Lighting or LED Lighting Available
- Energy Efficient with Excellent GPM/ kW Rates
- Industrial Strength Design
- Top Intake for Shallow Water Operation
- Bottom Screen Included
Motor Unit:
- 1HP, 120 or 240V, Single Phase
- 1750 RPM Motor
- Oil Cooled, Continuous Duty Rated
- Two Long Life Bearings
- Thermal Overload Protection
- Fully Unitized Heavy Duty Carbon Ceramic Mechanical Seal
- Series 300 Austenitic Stainless Housing with Engineering Grade Thermoplastic Top
Float:
- U.V. Resistant High Density Thermoplastic
- Single Piece Float with Closed Cell Foam Filling
- Series 300 Stainless Steel Hardware
- Engineering Grade Thermoplastic Bottom Screen with Stainless Steel Hardware
- Two 50’ Braided Nylon Mooring Ropes
Power Cable:
- SJTOW UL, CSA, & NEC Approved Underwater Rated Cable
- 3 Wire
- Available in 50’, 100’, 150’, and 200’ (250’, 300’,400’, & 500’ (special order) in 240V Options (Cord Gauges depend on length and voltage)
- Potted Quick Disconnect and Stainless Steel Strain Relief Standard on 10 and 12 Gauge Cords
- 6’ Flex Sleeve Protection
Control Panel:
- U.L. Listed per N.E.C.
- 15 Amp Class A Human Rated GFCI Outlets (120V)
- 20 Amp Class A Human Rated GFCB (240V)
- Surge Protector (240V)
- GFI Outlet (120V) or Terminal Block (240V)
- Photo Cell for Light Kit (120V) or Timer (240V)
- NEMA Type 3r/4x Enclosure
- 24 Hour Mechanical Timer
Fountain Components
- UV Resistant 4 Blade Engineered Thermoplastic Propeller with All Blades on the Same Plane
- UV Resistant Thermoplastic Draft Tube and Fountain Disc with Series 300 Stainless Steel Hardware
Optional Lights
- 3 ETL Approved Bronze, Halogen 75W, MR-16 Fixtures with thermal overload protection
- 3 Light LED, Sealed Fixtures with Quick Connect Splitter and No Bulb Changing
PondMeister Note:
For Aeration Sizing purposes, as a rough Rule-of-Thumb, Kasco uses 1 HP for every Surface Acre of water.
One Surface Area of water is 43,560 square feet.
For example, if your pond is 100' x 100' you have 10,000 square feet of Surface Area. This would require a 1/4 HP Kasco Fountain
View the PDF for complete operating instructions.