Ammonia Remover by Microbe-Lift
Starts at: $6.00
MICROBE-LIFT/Ammonia Remover removes ammonia, chlorine and chloramines rapidly and completely when used as directed.
New Improved Formula
Works immediately and will not interrupt biological filtration
MICROBE-LIFT/Ammonia Remover is buffered to help prevent a drop in both alkalinity (acid-neutralizing capacity) and pH when used to remove very high levels of total ammonia.
To remove and detoxify ammonia, chlorine and chloramines for water in ponds, add 1 teaspoonful of MICROBE-LIFT/Ammonia Remover per 15 gallons (57 L.) or 1 fl. oz. per 90 gallons of water. To remove ammonia in existing ponds add 1 teaspoonful/15 gallons of MICROBE-LIFT/Ammonia Remover for each 1.0 mg/L., or fraction thereof, of measured total ammonia (=0.85 mg/L. total ammonia-nitrogen). To control ammonia when shipping fish or invertebrates use MICROBE-LIFT/Ammonia Remover at the standard dosage rate or increase (up to 10 times) if total ammonia levels are expected to be higher than 1.0 mg/L. It is recommended for routine shipping of fishes and invertebrates that trial static shipping tests be performed to determine the typical levels of total ammonia that will occur in untreated water.
For complete water conditioning we recommend the use of MICROBE-LIFT/Xtreme.
Available in 3 sizes:
EML165 -16 oz -
EML166 -32 oz -
EML167 -1 Gallon -