Submersible Pump Screens by EasyPro 12" dia. x 14" tall and 20" dia. x 18" tall
Starts at: $110.49
Use these handy intake screens with any submersible pump when pumping water from a lake, pond, river or tank.
These sturdy built screens will protect pump from sticks, weeds, fish and other large debris.
• Available in two sizes — 12" diameter x 14" tall or 20" diameter x 18" tall
• Heavy duty 1/2" x 1" epoxy coated, galvanized, mesh screen
• Drawstring top allows for easy pump removal/inspection and will draw up tight to any pipe from 11/2" to 4" in diameter
• Screens can be used vertically or horizontally
Available in two sizes:
SPS12 - 12" dia. x 14" tall - The inside diameter of the SPS12's top ring is 9" and it is 3/4" thick
SPS20 - 20" dia. x 18" tall - The inside diameter of the SPS20's top ring is 16" and it is 3/4" thick.
EASY PRO NOTE: Keep in mind once past the top ring the inside of the SPS20 basket is 19.75" diameter and the SPS12 basket is 11.75". For example our TH250 pump's base is 10" in diameter. By tilting the pump a little bit to get the base past the inside ring of the SPS12 the pump will fit just fine. Once the pump is in the basket the tubing can be attached.
Will the SPS20 fit the A-32 pump which is 8.5" W x 15" L x 23" H?
Easy Pro Answer:
Based on the dimensions you provided I think SPS20 would be a good fit. The SPS20 basket is 20" in diameter and 18" tall. But it also has a mesh top with a drawstring that can be pulled up tight over the pump and around the pipe. Similar to this picture of the SPS12 with a TH pump in it.