Introduce more oxygen faster with a 3400AF Surface Aerator. The high-performance design of this aerator uses a single open propeller that creates and pushes water droplets into the air allowing efficient transfer of oxygen to the water. Agitation and movement created by the process spreads the oxygenated water throughout the body of water. These units can operate in as little as 17.5 in. (.5M) of water. The 3400AF Surface Aerator is ideal for ponds/tanks with surface areas of about 3/4 acre.
Protect your AF Series Surface Aerator power cord by adding a flex sleeve cord protector. Made of high strength, abrasion and cut resistant polyethylene, these cord protectors will keep your power cords safe from threats like wildlife, fish hooks and weed whippers.
The 3400AF is available in 120V (60Hz), 240 (60Hz), or 220V (50Hz) configurations. All units come with a float and two 50 ft. (15m) mooring lines. Optional bottom screens and/or control panels are also available.
- High-efficiency design means low power compensation and low operating costs
- Heavy-duty motor and corrosion resistant design; suitable for salt-water or other corrosive environments
- Safety Tested: ETL listed to UL and CSA Standards, 50Hz models CE marked
- An easily replaced protective sacrificial zinc anode included with each unit
- Low maintenance and dependable design
- Multiple cord lengths available (see charts below); all SJTOW underwater rated (50 Hz models are available only with 10M or stub power cords)
- Ships via FedEx
- 2 year warranty
FEATURES AND BENEFITS OF POND AERATORS
Efficient / Low Power Use: Highest efficiency design for low power consumption versus competing units. Reduces operating costs over the entire life of the unit.
Rugged Motor: Environmentally friendly design with a hard-face internal mechanical seal and external lip seal for protection against leaks. Long-life top and bottom ball bearings. Flood oil lubricated for excellent heat dissipation.
Corrosion Resistant: Superior dependability in salt-water or other corrosive environments. All external metal motor, float, and hardware components are of stainless steel composition and protected by a sacrificial zinc anode.
Low Maintenance: Clean the motor housing once or twice per year and replacing the sacrificial zinc anode when visibly corroded.
Fully Tested: ETL listed to stringent UL and CSA Safety Standards.
Dependable: Backed by a two-year warranty
All models include a float and two 50' braided nylon mooring ropes and are available with 100' SJTOW underwater rated electrical power cords.
View the PDF for complete operating instructions.