• 

  Same as the Sheer Falls Stainless Steel Waterfall Weir but with a rich copper color 11″ weir opening / spillway 

• Dual 1″ FPT (female threaded) rear and bottom entry ports 1.97″ weir lip 
• Made from stainless steel 
• Top quality, heavy-duty construction 
• Provides fantastic water sound 
• Good for pond aeration 
• Use indoors or out White, blue and color changing LED light bars are available as an option

Image below shows Intake in the back of the unit:

Image below shows the new units which have Intakes below and to the back of the unit (Please specify that you would like the new unit):

This is showing light bar mounted on the new style of Sheer Falls which have the Dual Inlets. Bar is much more out in the open than the old way of mounting

This is top view of a light bar in new style Sheer Falls.

Top Plate - Bottom View - TCP11 Sold Separately

Top Plate - Top View - TCP11 Sold Separately

F.A.Q.

Question: How do I install the top plate on top of the falls if I want to use Cinder blocks above the falls?

Answer: Please note that NONE of the Calais units are load bearing nor intended to be in a load bearing situation. The installation processes are numerous & only limited by the creativity of the installer itself. One common method of installation is by notching into the wall material (stone or concrete blocks) to accommodate a load bearing lintel (steel grade “L” brackets) so that the units can still reside free from any weight.

Although the diagram below is for the acrylic sheer falls, this applies to all of the weirs in our Calais collection.

Customer Question: Does the lip need to stick out or can it be fit flush?

Supplier's Answer: It can be flush, but the water may fall too close to wall. The wall can "pull" water toward the wall if not falling far enough away from wall.r enough away from wall.

Customer Question: What is the maximum height it can be installed without the pattern breaking up?

Supplier's Answer: The rule of thumb is that water should fall in a sheet approximately the width of falls. 24" falls 24", 36" fall 36" and so forth.

Customer Question:

I am interested in the Calais Copper waterfall spillway 23" one. I have a few questions about this. Does this have baffles inside? I think you mentioned it is not solid copper, will the copper wear off? I am in Colorado. Do you recommend taking it inside in the winter months?

Supplier Answer:

It is the same as our traditional stainless steel Sheer Falls. Yes, they have baffles inside. Only difference is the color. The copper should not wear off. This is the first year we have sold, so do not have many out in North America, but they have been sold elsewhere in the world. If they are drained of water completely, they could stay outside. But it it were me, I would mount the unit in a wall with a shelf that the unit sets on. Do not mount unit permanently in the wall. This will allow removal of the unit for maintenance or for winter if need be.

Customer Question:

Can I pump water through a Bead Filter and then through this Sheerfalls?

Supplier's Answer:

“I would not recommend this set up: pump - filter - Sheer Falls. If they want the beautiful falls that the Sheer Falls creates, then it should have a dedicated pump. Any thing that can change the flow to falls, like a dirty filter, the Sheer Falls flow will be reduced and will not look good at all. There would not be reason to pay the $$ for Sheer Falls and not have beautiful sheet of water. By the way, both acrylic and SS falls are effected the same. Once flow is found using a ball valve, then that flow needs to be maintained.”