Gold Label Pond & Aquarium Sealer by Hutton Aquatic Products Black - Now Available!

Gold Label Pond & Aquarium Sealer by Hutton Aquatic Products | Foam/Tape/Glue

Gold Label Pond & Aquarium Sealer by Hutton Aquatic Products
Black - Now Available!

Write a Review

Starts at: $30.61

Brand: Hutton Aquatic Products

SKU:GOL075

MPN: 7971

Gold label Underwater Sealer does exactly what the name says, it is remarkable and it will seal everything and everything, stainless steel to stainless steel, it will stick steel to plastic, plastic to wood, wood to stone, stone to plastic and what’s more as the name suggests it can be used underwater

Yes actually underwater and this is the most amazing thing about this truly remarkable product imagine being able to seal any leak without having to drain the pond and further more it is completely safe for the fish or any other pond life

No longer need you worry about sealing that Pond liner and installing a Bottom Drain use this remarkable sealant and it will never leak, in fact you would have to break the bottom drain to be able to remove it, repair instantly a cut in the liner below the water level, if you can reach it then you can seal it without any worries whatsoever.

For best results clean all surfaces to be free of grease, algae, etc.

Place sealer directly onto the surface you wish to bond/seal.

For bonding where there is movement (expansion and contraction) of different materials leave a minimum 2mm thickness of bead between surfaces.

Full cure 24 hours, initial tack 2-3 hours, can be painted over up to 4 hours.

Colour black.

Supplied in a tube ready for application using a skeleton gun

No need to remove fish for curing, leaks or adding elements to your pond

Seals underwater - cures with moisture

Seals almost anything
-Rubber
-PVC
-Glass
-Stone
-Plastic
-Etc.

Can be used in awkward leak repairs

100% Fish Safe

For best results clean all surfaces, to be free of grease, algae. Place sealer directly onto the surface you wish to bond/seal. For bonding where there is movement (expansion & contraction) of different substrates, leave a minimum 2mm thickness of bead between surfaces. Where there is livestock near the sealer, protect from ingestion while curing.

Full cure 24 hours. Initial tack 2-3 Hours.

Can be painted over up to 4 hours.

FAQ

Can I actually use this in wet conditions ie rain or under water?
Yes. Gold Label is able to stick to a surface by displacing moisture from the surface.

Will it cure under water?
Yes, as it uses the oxygen in the water to cure.

Does temperature affect it?
In its uncured state, it does. It will not cure below freezing and it will be very slow curing under 5°C. Optimum temperature is 16°C.

I cannot get it to stick
Most common reason is trying to use it as a glue! It is a sealant which needs a body of product to work. If you squash the surfaces to be stuck then the area cannot affect a cure. Always apply a bead approx 5mm and gently attach object or liner patch to leave a bead of approx 2-5mm 
(Do not be tempted to pull it off to see if it is stuck before 3 days as temperature and thickness of sealer will affect the cure rate)

Can I use it to repair gutters, roofs etc?
Yes, Gold Label will stick to most surfaces.

Will it stick to vinyl?
Yes, make sure surface is clean and sound, and abrade lightly.

Can I use Gold Label in marine tanks?
Yes, there is no difference in performance between fresh water and salt water.

Can I use Gold Label to stick living rock or coral?
Yes, because Gold Label is an inert, non-toxic product it can be used safely on coral or living rock.

I need to use acrylic glass for safety in my pond / tank. Will Gold Label stick the acrylic to the frame?
Gold Label has 4 times the bond strength of silicone on acrylic and has been used in major installations using acrylic sheet.

Can I use Gold Label to fix equipment eg pumps, filters to the side of ponds or tanks?
Yes, make sure you bed the equipment on a bead of sealer at least 5mm. This is to allow slight movement between the two surfaces and support for 24 hours to allow the sealer to cure before any weight is put on it.

Can I join two pieces of liner together?
Yes, by putting two beads of 5mm diameter, 100mm apart on the overlap. Then gently run your fingers over the line to make sure the sealer has connected both pieces of liner. DO NOT PRESS FLAT. By having two beads of 5mm, the liner can expand and contract without tearing and it will allow for any imperfections in joining of the two liners.

Do I have to drain the pond / tank before using Gold Label?
No, you can use this under water to bond practically anything.

Can Gold Label be used to stick rockery / decking / slabs / slate etc to the surround of the pond or the liner?
Yes, Gold Label has a very strong bond to most surfaces. If the product you wish to stick is powdery, it is advisable to seal it with a primer first – contact us for advice.

Can I use Gold Label in swimming pools / spas?
Yes, this will adhere even in chlorinated water.

Can I fix a crack in a concrete pond / pool?
Yes. First vee-out the crack to approx 10-20 mm and fill with Gold Label. If concrete is powdery, use primer first. If the concrete is powdery, then a latex primer is recommended. If concrete is free of this situation, then not as important.You can source at a paint store. It is meant to allow sealer to adhere to a solid piece of concrete and not to a powdery surface. If concrete is good and solid, with out small pieces on surface, then sealant should be okay. It's that it will not adhere very well when concrete does not have a good solid surface.


Testimonial from Linda A (After Tube leaked in Transit on 1st delivery)

I just wanted to thank you for the no-hassle replacement and the great service.

But also, this Gold Label Pond and Aquarium sealant worked perfectly and saved me from having to replace my 60-gallon tank.

I used it to re-seal a glass aquarium wall to a plexiglass spill-over that goes to a sump below the aquarium. The entire side of the spill-over had come apart and water was leaking directly into it instead of just gong over the top.

The sealant was easy to apply even though the tank was full and the filter running, and sealed the leaking immediately. All I had to do was remove the silicone which had failed, apply the sealant in a 1/2 inch running bead along the seam, and pat it down to touch the glass wall and plexiglass wall. The water pressure appeared to have no affect on the sealant and did not push any of it into the filter intake.

I am impressed! Spending $24 for the product and shipping is well worth it to not have to move everything into a new tank!  

Thought you could use the customer testimonial.

Thanks again.

Available in 2 Sizes:

GOL075 - 2.5oz. "One Shot" Sealer with trigger nozzle (silicone gun NOT required) - Black

GOL290 - 9.8oz. Pond Sealer (silicone gun REQUIRED, not included) - Black

For best results clean all surfaces, to be free of grease, algae. Place sealer directly onto the surface you wish to bond/seal. For bonding where there is movement (expansion & contraction) of different substrates, leave a minimum 2mm thickness of bead between surfaces. Where there is livestock near the sealer, protect from ingestion while curing.

Question:

I am having trouble squeezing out the sealer out of the 9.8 oz tube.

Supplier Answer:

I just tried one myself. The product is rather thick when it leaves the tube. Please have him check to make sure that the opening is completely open. Not just a puncture with something with a sharp point. The opening has to be sufficient for product to leave tube. Also, the tube of product has to be fairly warm.


Question:

How to prep liner to use Gold Label Sealer and Bottom Drain Seal?

Supplier Answer:

It must be clean of grease, algae etc. For liner they recommend two beads 150mm apart and leave to cure for 36 hours.

View the PDF for complete operating instructions.

View PDF Info Sheet

Reviews


Get updates about specials, announcements, and seasonal sales