Alpine's new Pond Vacuum is quieter then your traditional pond vacuum due to its submerged motor.
With the lightweight and adjustable telescopic handle, this vacuum will help turn a two day cleaning task into a one day cleaning.
The high powered motor can remove debris up to one inch in diameter including sludge, leaves, algae, and more!
Assembling:
1. Connect the extendable pole (Part 5) to the pond vacuum (Part 1).
2. Connect the tubing hose (Part 6) to the outlet elbow (Part 4).
3. Connect the outlet elbow (Part 4) to the pond vacuum (Part 1).
4. Select the suitable brush head (Part 2 or Part 3).
5. Lock the brush head (Part 2 or Part 3) in place by closing the blue buckle. See Figure 1.
6. Insert battery into the handle box located at the end of the extendable pole (Part 5).
- Energy Saving
- High Performance 250 Watt Motor includes on/off switch handle
- Adjustable telescopic handle
- Removes debris up to 1" in diameter, including sludge, leaves, stones, blanket weeds and more!
- 1500 max flow volume
- 16 ft discharge hose
- 33 ft power cord
- Safe to use with fish in ponds
- Use IN water
Operating Instructions:
1. Place the pond vacuum near the edge of the pond in the water.
2. Take the unconnected end of the hose and place it in an area where you want the debris to be placed
Be sure not to contort the hose.
3. Plug the pond vacuum to a nearby power outlet. Make sure the plug stays dry. Also, do not let the vacuum run dry.
Refer to Figure 2 for the following steps
4. To start the vacuum, push the black button once on the handle and make sure the red light is on.
Don’t use vacuum out of water, or it will cause damage to the impeller.
5. To turn off the vacuum, push the black button once on the handle and make sure the red light is off.
Figure 2
6. Pull the pond vacuum out of the water when not in use.
7. To extend the pole, hold with one hand the silver part of the pole still and then twist the black handle with the other hand to the left. This will loosen the pole so you can adjust the sizing.
8. To lock into place, hold with one hand the silver part of the pole still and then twist the black handle with the other hand to the right.
View the PDF for complete operating instructions.
