UltraKlear UV Clarifier/Sterilizer Free Shipping
UltraKlear UV Clarifier/Sterilizer Free Shipping
Starts at: $199.99
Shipping: Free
Brand: Aquascape
SKU:95036
Need accessories for this item?
View AccessoriesProduct Accessories
In a pond, algae blooms, or "green water" can be a difficult issue to address safely and effectively. Not anymore!
The Aquascape UltraKlear UV Clarifier/Sterilizer uses a technologically advanced T5 high output UVC bulb, making it more efficient than traditional UV Clarifiers.
The Aquascape UltraKlear UV Clarifier/Sterilizer features a swirl sleeve that helps direct the water around the UV Bulb, creating more contact time and increasing UV efficiency unto 50% over traditional UV Clarifiers!
Features:
- Effectively Clears unsightly green (pea soup) water algae blooms
- Simple to use and easy to maintain
- Features a swirl sleeve that optimizes UV efficiency
- High Output UV Bulb maximizes performance
- Easy to Remove bulb and quartz sleeve
- Can be mounted vertically
- 3 Year Limited Warranty!
PondMeister Tip: For ponds larger than 5,000 gallons or ponds containing large fish loads, we recommend using a larger unit, or multiple UltraKlear UV Units. Multiple units can be easily plumbed in line with an UltraKlear UV Adapter Kit or the Aquascape Two-Way Valve.
Question:
The power indicator light does not come on. I do not think my new UV light is working
Aquascape Answer:
The best way to check is at night time when its dark outside. What is labeled an “indicator light” is not really a light, it’s a port that shows the reflection of the bulbs glow and unfortunately is difficult to see on a sunny day.
Question:
I am trying to make sure fitting for aquasape uv5000 will adapt the uv unit to 2"hose... size seems correct but hope more info to be sure
Aquascape Answer:
If you use the 38mm to 1.5” FPT adapter that comes with the units, you can use a regular Spears 1.5” FPT x 2” slip fitting to connect the plumbing. I threaded on a spears fitting all the way on the metric adapter with no problems.
Question:
We just installed our light, two weeks ago, and the bulb indicator has already quit working. Could you please send a replacement bulb so we can see if it’s the bulb or the light?
Aquascape Answer:
The customer can test the bulb by removing the ballast and pressing down on
the safety button located on the indent where the ballast locks when
assembled, see picture below. Make sure the customer knows not to look
directly at the bulb as it could be harmful due to the brightness of the
bulb. Once this is done you will know if the bulb or the ballast needs
replacing. If the bulb comes on then the ballast is the issue if the bulb
does not come on try replacing the bulb. |
View the PDF for complete operating instructions.
