80WQ 0.37-4P - 230V
12000GPH max flow
Max head: 18ft
1/2hp,230V,single phase
4Amps motor full load
3" discharge
33ft long water proof power cable
Size: 14"X12"X20.5"
Specification:
Speed: 1750RPM (nominal)
Solid Handling: 2" Max
Ambient Temp: 104F (40C) Continuous 140F(60C) Intermittent
Max. Start/Stop times per hour:15
Volute: Cast Iron, ASTM A-48 Class 30.
Motor Houseing: Cast Iron, ASTM A-48 Class 30.
Seal Plate: Cast Iron ASTM A-48 Class 30.
Impeller: 2-Vane, Open, Cast Iron, ASTM A-48 Class 30. Balanced for smooth operation.
Shaft: Corrosion resistance stainless steel, Threaded design.
O-Ring: BUNA-N, assures positive sealing against oil leakage.
Dual Mechanical Seal: 300 S.S. metal parts, BUNA-N elastomers.
Upper Seal : Carbon (rotary) VS Ceramic (stationary)
Lower Seal: Silicon Carbide VS Silicon Carbide.
Insulation: Class B
Entry: Pressure grommet for sealing and strain relief.
Motor: Squirrel Cage Induction, Single Phase, 4 Poles, Oil filled, 230V/60Hz, 1/2Hp, built-in Thermal Protector, with automatic reset. Permanent Split Capacitor Type
| GMP at Height (ft.) | Shut Off (ft.) | ||||||||
| 5 | 10 | 15 | 20 | 25 | 30 | 35 | |||
| 80WQ0.37-4P | 1/2 | 198 | 140 | 65 | - | - | - | - | 18 |
| 80WQ0.55-4P | 3/4 | 250 | 210 | 140 | 60 | - | - | - | 23 |
| 80WQ0.75-4P | 1 | 264 | 200 | 150 | 66 | 17 | - | - | 26 |
| 80WQ1.1-4P | 1.5 | 295 | 280 | 180 | 135 | 66 | 40 | - | 32 |
| 80WQ1.5-4P | 2 | 308 | 265 | 200 | 155 | 90 | 70 | 30 | 38 |