Use to create a waterproof seal in the bottom of pots & urns so a pipe can be easily connected providing water from a pump.  

Kit Includes The Following Parts:

• 1" x 24" PVC Stand Pipe (can be cut smaller by you if needed)
• 1" Bulkhead Fitting (Requires a 2" hole in bottom of pot)
• Fitting for Stand Pipe (1" slip x 1" thread)
• Fitting for Pipe (1" thread x 3/4" barb)

Instructions for use

1. Connect the bulkhead fitting into the pre-drilled hole in the bottom of your bubbler.
2. Screw in the black fitting into the bottom of the bulkhead fitting.
3. Attach one end of your Kink-Free Piping to the black fitting, then attach the other end to your pump.
4. From inside the bubbler, screw the white connector into the top of the bulkhead fitting.
5. Now insert the long white PVC pipe into the white fitting.
6. Turn your pump on and fill the bubbler with water.
7. You can cut the PVC pipe down to the correct height if it is too high. The correct height will depend upon the bubbling effect that you desire. Try different heights to see the different interesting effects.
8. If you cut the PVC pipe too short, do not worry! You can purchase a piece of 1" PVC pipe at any local Home Center, Irrigation Supply or Plumbing Supply House. Maybe you will want to have several different lengths of PVC pipe so you can change how the bubbler moves the water with minimal effort.