Mechanical Water Leveler Kit For use with Savio SkimmerFilter

Pond Plumbing Supplies | Mechanical Water Leveler Kit

Mechanical Water Leveler Kit
For use with Savio SkimmerFilter

Write a Review

Starts at: $60.00

Brand: Savio

SKU: K1003L

The SAViO Mechanical Water Leveler Kit is specifically designed to operate with the SAViO Skimmerfilter. Maintain constant skimmer water level to prevent pump damage. 

Install the Water Leveler Kit to as water supply line and attach to your Savio Skimmerfilter. 

Provides a steady flow of water for optimum skimmer filter operation. Eliminates the possibilities of your submersible skimmer pump from running dry. 

Included self-tapping hose kit features a saddle valve that connects to copper, plastic, or iron water supply lines up to 1" in diameter. 

Attached saddle valve draws water from the supply line to automatically fill skimmer filter chamber when water level drops and the included mini float valve is activated.

 Includes:
  • Mini Float Valve
  • Baffle Shield
  • Self-Tapping Hose Kit (Saddle Valve and Plumbing Hardware)
  • *Please Specify Left or Right Installation Model

Available Models:
K1003L - Left Mounting Kit  (Looking into pond from the land) 
K1003R - Right Mounting Kit (Looking into pond from the land)

Key Features

  • Installation Kit maintains proper water level in Savio Skimmerfilter
  • Helps Ensure Optimum Pond Skimmer Filter performance
  • Keeps pond pump fully submerged to prevent pump damage
Available Models:
K1003L - Left Mounting Kit  (Looking into pond from the land) 
K1003R - Right Mounting Kit (Looking into pond from the land) 
Assembly and Installation Instructions

The Savio Mechanical Water Leveler Kit is specifically designed to operate with the Savio Skimmerfilter. This kit will provide a regulated flow of water to maintain an optimal water level and can be connected to copper, plastic, or iron water supply lines up to 1 inch in diameter.

Tool needed: Phillips screwdriver and crescent wrench or pliers.

Note: If the Savio Skimmerfilter is in operation, turn off the pump and unplug UV before installing the Savio Mechanical Water Leveler Kit.


Step 1
Remove existing Baffle Shield from Savio Skimmerfilter. Save the screws for later.


Step 2
Tighten thumbscrew on the Float Valve so the valve hangs at a 90-degree angle.

Step 3
Install water level assembly. Use screws from Step 1 to secure.

Step 4
Turn off water source. Attach Self-tapping Hose Kit to waterline. Follow instructions included with Self-tapping Hose Kit. Extra fittings have been included to allow for greater versatility.

Step 5
Connect Hose to Water Leveler Kit.

Step 6
Turn on water source and monitor water level to ensure Float Valve is operating correctly. Turn on pump to resume normal Skimmerfilter operation.

View the PDF for complete operating instructions.

View PDF Info Sheet

Reviews


Get updates about specials, announcements, and seasonal sales